Customization: | Available |
---|---|
Warranty: | 18 Months |
Accuracy: | >±1% |
Still deciding? Get samples of US$ 600/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
features
High linearity and good repeatability
Because the HJP series porous balance flow sensor has the characteristics of porous symmetrical structure and a large number of test data show that the porous balance flow sensor can balance the flow field, reduce the eddy current, reduce the vibration and signal noise, greatly improve the stability of the flow field, and make the linearity It is 5~10 times higher than the orifice plate, and the repeatability is increased by 54% to 0.15%. From the perspective of its comprehensive performance, the porous orifice flowmeter has high-end flowmeter performance and can be used for trade measurement.
Linearity up to ±0.3% at 5:1 turndown
Linearity up to ±0.7% at 7:1 turndown
Linearity up to ±1.0% at 10:1 turndown
overview
HX3052 multi-parameter transmitter is a new type of intelligent transmitter which integrates differential pressure, pressure, temperature transmitter and flow integrator. Display pressure, differential pressure, temperature, instantaneous flow and cumulative flow at the same time. Can replace intelligent differential pressure transmitter, pressure transmitter, temperature transmitter and flow integrator 4 instruments.
Easy to install, no need to debug, install can be used. And can automatically calculate the temperature and pressure compensation for gas, steam and other media, and realize the direct display of parameters such as standard flow rate. The multi-parameter transmitter works with 24V power supply and built-in lithium battery. In the case of external 24V power supply, it can provide current 4-20mA(two-wire system) or RS485(four-wire modbus-rtu system) for remote transmission.
The multi-parameter transmitter can be directly matched with any differential pressure type standard throttling device (V cone flow sensor, orifyplate flow sensor, elbow flow sensor, nozzle flow sensor, Venturi single flow sensor, Aniuba flow sensor, Weiba flow sensor, Bitoba flow sensor, wedge flow sensor, Delta flow sensor, uniform pitot tube flow sensor, etc.) Used to form a multi-parameter differential pressure flowmeter (V cone flowmeter, orifice flowmeter, variable tube flowmeter, nozzle flowmeter, venturi flowmeter, A Niuba flowmeter, Weiba flowmeter, Bitoba flowmeter, wedge flowmeter, Delta flowmeter, uniform pitot tube flowmeter, etc.).
The introduction of multi-parameter transmitter brings a revolution of differential pressure flowmeter, which is more convenient for customers to use. This kind of multi-parameter transmitter has made a major breakthrough in the micro power consumption (built-in lithium battery can be self-powered for 2-3 years) range ratio (up to 1:500) micro differential pressure (10pa-1500pa).
Suitable for all differential pressure flow sensors
It can be powered by battery and can work for 2-3 years without external power supply on site (no output).
Full isolation output super anti-interference design, shielding all interference
Power supply 24VDC(4-20mA two-wire system or RS485 communication four-wire system)
Built-in temperature and pressure sensor
Automatic temperature and pressure compensation for gas and steam
The range ratio is 1:2000/1:4000/1:500
Precision class 0.25
Gas can display temperature, pressure, standard flow and other parameters
Steam can display temperature, pressure, mass flow and other parameters
The flow sensor linearity can be corrected in ten stages
Differential pressure can be measured at a minimum of 10Pa
Users do not need to do any debugging installation to use high reliability, users do not need to do any maintenance