| Customization: | Available |
|---|---|
| After-sales Service: | Video Mode |
| Warranty: | One Year |
|
Still deciding? Get samples of US$ 250/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Overview
Electromagnetic flowmeter design and manufacturing in line with the standard JB/T9248-2015 "electromagnetic flowmeter", is a measurement of conductive medium volume flow speed instrument, in the field monitoring display at the same time, can output the standard current signal, for recording, regulation, control use, automatic detection control, and can realize the signal long-distance transmission. Widely used in environmental protection, steel, petroleum, chemical, coal, metallurgy, minerals, paper, water supply and drainage, food, medicine and other industries in the flow measurement of conductive liquid. The structure of the instrument has a body type and a sub-body type.
2. Special points
No moving parts in the measuring tube, easy to maintain and manage; Free flow parts, no pressure loss;
★ The lowest electrical conductivity of the measured liquid is ≥20μS/cm. With various lining materials, it can be used to measure the flow of various acid, alkali, salt solution and mud, pulp, pulp and other media.
★ The measurement accuracy is not affected by the fluid density, viscosity, temperature, pressure and conductivity changes, the sensor induced voltage signal and the average flow rate is linear relationship, high measurement accuracy;
Low frequency rectangular wave excitation, not affected by power frequency and field interference, stable and reliable work;
★ Not affected by the direction of fluid, positive and negative can be accurate measurement;
★ LCD backlight display, online parameter modification, easy to operate;
★ Chinese and English display mode (optional);
★ Can record the forward total, reverse total and difference total;
★ It has the function of air control measurement and alarm, and can adapt to different fluid medium.
3. Measurement principle
Electromagnetic flowmeter is the use of Faraday's law of electromagnetic induction principle, that is, conductive objects in the magnetic field to cut the magnetic line of force motion, induction electromotive force in the conductor. Its induced electromotive force
E is: E=KBdV
Traffic Q: Q=3600 x V x S
Where: K -- instrument coefficient
B -- Magnetic induction intensity (T)
D -- Electrode spacing (m)
V -- Average flow rate of fluid (m/s)
S -- Cross-sectional area of the catheter (m²)
When the flow rate is measured, the conductive liquid flows through a magnetic field perpendicular to the flow direction at the flow rate V. The conductive liquid flow induces a voltage proportional to the average flow rate. The induced voltage signal is detected through the electrode in direct contact with the liquid. For the same flowmeter S, B, d are constant, so the flow rate is proportional to the magnitude of the induced electromotive force E(or flow rate V).
4. Technical indicators
Applicable measuring diameter: DN6mm ~ DN3000mm
Dielectric conductivity: ≥20 μs/cm
Lining material: polyneoprene rubber, polyurethane rubber, silicone fluorine rubber, polytetrafluoroethylene (PTFE), polyperfluorinated ethylene propylene F46, PFA
Electrode material: SUS316, Hasloy B (HB), Hasloy C(HC), titanium (Ti), tantalum (Ta), platinum/iridium alloy
Working temperature: -20ºC ~ 60ºC
Ambient humidity of the converter: ≤ 95%
Shell protection class: IP65, IP67, IP68
Measuring range: 0.5 ~ 10 m/s
Matching accuracy level: 0.5, 0.2
Measurement parameters: instantaneous flow, velocity, positive and negative cumulative total
Detection and alarm parameters: fluid air pipe detection and alarm, excitation current detection and alarm, upper and lower limit alarm, system alarm
Network functions: HART, MODBUS, GPRS, PROF
IBUS (Optional)
Power supply
Ac power supply, voltage range: 85VAC to 250VAC 24V DC power supply, voltage range: 20VDC to 36VDC self-powered 3.6V power supply
Range selection parameters
| Inner dia.(mm) | Flow range(m3/h) | Inner dia.(mm) | Flow range(m3/h) |
| DN10 | 0.3~1.6 | DN300 | 300~1200 |
| DN15 | 0.8~3.0 | DN350 | 400~1600 |
| DN20 | 1.2~5.0 | DN400 | 500~2000 |
| DN25 | 2.0~8.0 | DN450 | 600~2500 |
| DN32 | 3.0~12 | DN500 | 800~3000 |
| DN40 | 5.0~20 | DN600 | 1000~4000 |
| DN50 | 8.0~40 | DN700 | 1600~5000 |
| DN65 | 12~60 | DN800 | 2000~6000 |
| DN80 | 20~120 | DN900 | 2000~8000 |
| DN100 | 30~160 | DN1000 | 2500~10000 |
| DN125 | 50~250 | DN1200 | 3000~12000 |
| DN150 | 80~400 | DN1400 | 4000~16000 |
| DN200 | 120~600 | DNH1600 | 5000~20000 |
| DN250 | 200~800 |
Q: The new magnetic flap liquid level gauge can't show liquid level?
){kind=link}